After Installing the automatic side mirror folding relay kit, your side mirror kit will be closed automatically whenever you lock the door and it will be automatically open whenever the ignition is on in your car. You don’t have to cut the wire during the installation, but you might be wiretapped that you have used for the connection to the central locking system.

Attention:

• The automatic side mirror folding relay kit product is only used if your car model side mirror folds from the manual button.
• if your car does not have the button inside to fold and unfold the mirror, don’t buy it.
• The side Mirror should be electronic to use this Relay.

Instruction for Installation:

• Find out the Original car Mirror Folder Switch.
• Separate Plug to Original Car Switch, Use Product’s Male Plug connectors to switch plug and Product’s Female plug connect to wrings group.

How to find out the center lock motor positive line:

Searching the wire at the center motor wires group, use the 12V test pencil on one end to connect to Grand and the other end to touch the tested wire. Use a remote or key to press “lock”. At the moment of center, motor locking the test pencil will flash, this wire is the center lock motor positive line. Use our product pink wire to connect to it.

How to find out the center unlock motor positive line:

Searching the wire at the center motor wires group, use the 12V test pencil on one end to connect to Grand. The other end to touch the tested wire. Use the remote or key to press unlock. At the moment of center motor locking, the test pencil will flash, this wire Is (center unlock motor positive line) Use our product gray wire to connect to it.

* + 12V line:

Off the car use the test pencil one end touch grand (GND the other end touch measuring line If the test pencil light this line is + 12V power line